Feet Xlr
October 31st, 2008
No comments
Space Gate at Xlr-8 in Malta 2007
|
|
Kimber Silver Streak 4 meters (13 feet) * 2 XLR Switchcraft pair $849.00 |
|
|
NEW 12 CHANNEL XLR SNAKE CABLE -15 Feet Pro Audio Patch $49.99 |
|
|
8 Channel XLR 50 feet Stage Snake Cable $79.99 |
|
|
8 Channel XLR 30 feet Stage Snake Cable $69.99 |
|
|
CONQUEST Y ADAPTER XLR”FEMALE TO TWO XLR” MALES 2 FEET LONG $9.89 |
|
|
CONQUEST Y ADAPTER XLR”MALE TO TWO XLR” FEMALES 2 FEET LONG $12.87 |
|
|
RAPCO MICROPHONE CABLE XLR MALE TO 1/4″ MALE TS, MONO 12 FEET W/ S/CRAFT ENDS $8.59 |
|
|
RAPCO Y ADAPTER 1/4”MALE STEREO TO TWO XLR’S MALES 2 FEET LONG S/CRAFT ENDS $13.46 |
|
|
16 CHANNEL SNAKE XLR male/female to 1/4″ tip sleeve and RCA male 25 feet $9.99 |
|
|
HOSA 10 Ft (Feet) Balanced XLR M to 1/4″ TRS Phone Plug $14.80 |
|
|
6Lot PACK 3pin XLR male to female Microphone Mic Cable Cord Lo-Z 20 ft foot feet $31.00 |
|
|
3 x XLR M-F Mic Microphone Cables 50 feet $40.00 |
|
|
5 x XLR M-F Mic Microphone Cables 25 feet $39.00 |
|
|
Mogami Gold 8 Channel XLR Snake Cable 10 Feet $264.95 |
|
|
HOSA 10 Feet (Ft) Balanced XLR F to 1/4″ M Phone Plug $10.98 |
|
|
Mogami Gold 8 Channel XLR Snake Cable 10 Feet $264.95 |
|
|
HOSA MXP025 XLR to 1/4-Inch Phone Plug – 25 Feet $42.98 |
|
|
NEW 8 CHANNEL XLR SNAKE CABLE – 15 Feet Pro Audio Patch $39.99 |
|
|
8 Sends/4 Returns XLR SNAKE CABLE Color Coded 100 Feet $139.99 |
|
|
Planet Waves 10 feet Custom Series 1/4 inch XLR Male Balanced Microphone Cable $40.83 |
|
|
Custom Made 7.1 Channel Interconnects up to 3 feet Canare L-4E6S, RCA or XLR $130.00 |
|
|
AKG Cable Marked AKG MCH-20TS 20 Feet Long w/ XLR Female & 1/4 inch mono plugs $9.99 |
|
|
AKG Cable Marked AKG MCH-20TS 20 Feet Long w/ XLR Female & 1/4 inch mono plugs $9.99 |
|
|
NEW 8 CHANNEL XLR SNAKE CABLE – 10 Feet Pro Audio Patch $34.99 |
|
|
CONARE MICROPHONE CABLE XLR MALE TO 1/4 MALE MONO 5 FEET ” S/CRAFT ENDS $9.97 |
|
|
2 x XLR M-F Mic Microphone Cables 15 feet each $14.99 |
|
|
SIGNNAL FLEX MICROPHONE CABLE XLR TO XLR *WHITE* 16 FEET $12.46 |
|
|
Mogami Gold TRS-XLR Male Quad Patch Cable $49.95 |
|
|
Mogami Gold TRS-XLR Male Quad Patch Cable $65.95 |
|
|
18 XLR Mic Cables – 25 FEET in length – Brand new! – still in cardboard wrap $270.00 |
|
|
PPJX20 20 Feet 12 Gauge Professional .25 in. Phono To XLR Male $19.16 |
|
|
PPJX50 50 Feet 12 Gauge Professional Speaker Cable .25 in. to XLR Male $31.06 |
|
|
HOSA 1.5-Feet Microphone Cable 3.5mm TRS – XLR3M RA – MMX-001.5SR $27.98 |
|
|
Hosa MCL-150 Microphone Cable, XLR M – XLR F, 50 Feet $19.99 |
|
|
Monster Performer 500 Mic Cable – 100 Feet – XLR $199.00 |
|
|
NEW 16 CHANNEL XLR SNAKE CABLE -10 Feet Pro Audio Patch $54.99 |
|
|
3QTY pack LOT 25 FT foot feet PREMIUM XLR pin Male to Female Mic EXTENSION Cable $20.99 |
|
|
Custom Made 7 Channel Interconnects up to 3 feet Canare L-4E6S, RCA or XLR $118.00 |
|
|
Custom Made Stereo Interconnects up to 3 feet Canare L-4E6S Cable RCA or XLR $34.00 |
|
|
Custom Made 5.1 Channel Interconnects up to 3 feet Canare L-4E6S, RCA or XLR $99.00 |
|
|
NEW 12 CHANNEL XLR SNAKE CABLE -10 Feet Pro Audio Patch $39.99 |
|
|
NEW 16 CHANNEL XLR SNAKE CABLE -15 Feet Pro Audio Patch $59.99 |
|
|
12 Sends/4 Returns XLR SNAKE CABLE Color Coded 50 Feet $114.99 |
|
|
Nordost Blue Heaven XLR Balanced Interconnects 4 Feet 4ft 1.25m $129.99 |
|
|
3′ Feet XLR to 1/4″ DJ Audio Mic Cable 1/4 To Xlr 1.5m trs $7.00 |
|
|
8 Sends/4 Returns XLR SNAKE CABLE Color Coded 25 Feet $79.99 |
|
|
Monster S100-M-30 Standard XLR Mic Cable – 30 Feet – Free US Shipping – S100 30′ $35.00 |
|
|
Planet Waves 25 feet Custom Series Swivel XLR Balanced Microphone Cable $73.74 |
|
|
Planet Waves 10 feet Custom Series Swivel XLR Balanced Microphone Cable $61.86 |
|
|
Planet Waves 10 feet Custom Series 1/4 inch XLR Balanced Microphone Cable $45.14 |
|
|
NEW 20′ XLR MICROPHONE/ MIC CABLE APC-20M 20 FEET $16.50 |
|
|
Mogami Gold 8 Channel TRS-XLR Female Snake Cable 10 Feet $299.95 |
|
|
20′ Foot feet XLR Microphone Mic extension Cables cords 4Pack Full Warranty NEW $21.89 |
|
|
Sterling Audio ST69 Condenser Cable Microphone (free XLR 15 Feet Monster Cable) $500.00 |
|
|
NEW 8 CHANNEL XLR SNAKE CABLE – 10 Feet Pro Audio Patch $44.99 |
|
|
Live Wire 24X8 XLR Fan-Box Snake 125 Feet $949.99 |
|
|
Stagg XLR-XLR Microphone Cable – 10 Feet $7.99 |
|
|
Taylor Guitars Cord, STD TRS, XLR, 15 Feet $31.05 |
|
|
Hosa XVM105 Right Angle 3.5mm St M to XLR M (5 Feet) $18.95 |
|
|
Planet Waves Classic Series XLR Microphone Cable, 10 feet $17.50 |
|
|
Nady Xlr To Xlr Microphone Cable, 25 feet $23.08 |
|
|
5 PACK NEW premium PLOYNK 20 ft foot feet XLR mic microphone audio cable cord $40.00 |
|
|
SIGNAL FLEX XLR TO XLR MICROPHONE CABLE 16 FEET W/ NEUTRIK ENDS $7.86 |
|
|
NEW 12 CHANNEL XLR SNAKE CABLE -15 Feet Pro Audio Patch $59.99 |
|
|
Stagg XLR-1/4″ Microphone Cable – 20 Feet $7.99 |
|
|
NEW AMERICAN DJ XL-50 50FEET XLR TO XLR CABLE $24.95 |
|
|
NEW AMERICAN DJ XL-25 25 FEET XLR CABLE $20.95 |
|
|
NEW AMERICAN DJ XL-6 6 FEET XLR TO XLR CABLE $15.95 |
|
|
NEW AMERICAN DJ XL-3 3 FEET XLR CABLE $13.95 |
|
|
NEW AMERICAN DJ XL-12 12 FEET XLR CABLE $16.95 |
|
|
5 NEW 20 ft foot feet 3pin XLR male to female M/F microphone mic extension cable $26.80 |
|
|
4 25′ XLR Cables & 1 Roll Gaffers Tape 2″ X 180 Feet Drum Stage Kit $49.99 |
|
|
7 25′ XLR Cables & 1 Roll Gaffers Tape 2″ X 180 Feet Drum Stage Kit $69.99 |
|
|
Choose Length Made in USA PREMIUM STUDIO XLR MALE TO FEMALE MIC CABLE Fast Deliv $12.00 |
|
|
Choose Length Made in USA PREMIUM STUDIO XLR MALE TO FEMALE MIC CABLE Fast Deliv $14.90 |
|
|
Choose Length Made in USA PREMIUM STUDIO XLR MALE TO FEMALE MIC CABLE Fast Deliv $16.00 |
|
|
Choose Length Made in USA PREMIUM STUDIO XLR MALE TO FEMALE MIC CABLE Fast Deliv $17.75 |
|
|
Choose Length Made in USA PREMIUM STUDIO XLR MALE TO FEMALE MIC CABLE Fast Deliv $19.95 |
|
|
Choose Length Made in USA PREMIUM STUDIO XLR MALE TO FEMALE MIC CABLE Fast Deliv $22.75 |
|
|
Choose Length Made in USA PREMIUM STUDIO XLR MALE TO FEMALE MIC CABLE Fast Deliv $23.95 |
|
|
Choose Length Made in USA PREMIUM STUDIO XLR MALE TO FEMALE MIC CABLE Fast Deliv $24.95 |
|
|
Choose Length Made in USA PREMIUM STUDIO XLR MALE TO FEMALE MIC CABLE Fast Deliv $10.45 |
|
|
Choose Length Made in USA PREMIUM STUDIO XLR MALE TO FEMALE MIC CABLE Fast Deliv $11.50 |
|
|
200′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS XLR-M XLR-MALE $361.20 |
|
|
175′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS XLR-M XLR-MALE $321.20 |
|
|
150′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS XLR-M XLR-MALE $281.20 |
|
|
125′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS XLR-M XLR-MALE $241.20 |
|
|
100′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS XLR-M XLR-MALE $201.20 |
|
|
75′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS to XLR-M XLR-MALE $161.20 |
|
|
60′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS to XLR-M XLR-MALE $137.20 |
|
|
50′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS to XLR-M XLR-MALE $121.20 |
|
|
45′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS to XLR-M XLR-MALE $113.20 |
|
|
40′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS to XLR-M XLR-MALE $105.20 |
|
|
35′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS to XLR-M XLR-MALE $97.20 |
|
|
30′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS to XLR-M XLR-MALE $89.20 |
|
|
25′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS to XLR-M XLR-MALE $81.20 |
|
|
20′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS to XLR-M XLR-MALE $73.20 |
|
|
18′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS to XLR-M XLR-MALE $70.00 |
|
|
15′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS to XLR-M XLR-MALE $65.20 |
|
|
12′ FEET MOGAMI 2 CHANNEL BALANCED SNAKE NEUTRIK GOLD 1/4″ TRS to XLR-M XLR-MALE $60.40 |
|
|
HOSA Professional 25 Foot SH series stage box snake w/12 3-pin XLR send & 4 TRS return $131.99 The Hosa SH12X4-25 is a Professional 25 FOOT (30.5 m) SH series stage box snake w/12 3-pin XLR send & 4 TRS return channels. * Use to connect microphones & other stage gear to a mixing console * Features non-locking inputs & a hard-wired snake * A cost-effective solution for light- & medium-duty applications * Unit has 12 male XLR jacks on 25ft cable along w/4 male 1/4″ stereo plugs * Unit has 12… |
|
|
Monster AI STUDIOLINK iStudioLink 1/4-Inch Mono Female to 1/8-Inch Stereo Male Instrument Interconnect Cable $14.29 Monster Cable Cable iStudioLink Audio Extension Cable AI STUDIOLINK Cables… |
|
|
Premier Series XLR Male to 1/4inch TRS Male 16AWG Cable – Gold Plated – 3ft $3.19 Balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run. Additionally, unlike standard unbalanced RCA interconnects that utilizes their braid as a signal return, balanced cables have a separate braided shield to provide additional resistance to interference without modulating the interference into the signal. This prevents … |
|
|
Premier Series XLR Male to XLR Female 16AWG Cable – Gold Plated – 3ft (Microp… $3.43 Premier Series XLR Male to XLR Female 16AWG Cable – Gold Plated – 3ft (Microphone + Interconnect) Balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run. Additionally, unlike standard unbalanced RCA interconnects that utilizes their braid as a signal return, balanced cables have a separate braided shield to provide additi… |
|
|
16 Channel Mixer Cable Bundle StudioLive 16 XLR 20 Foot $179.95 This specially priced cable bundle contains numerous types of cables. (16) 20 ft XLR male to XLR female. Great for microphones. (4) TRS to TRS for any outboard equipment. (2) XLR male to TRS for monitors. (2) Female XLR to TRS for converting between XLR and 1/4 inch for outboard effect, and professional cd players. (2) 50 ft XLR male to XLR female for connecting to loud speakers…. |
|
|
24 Channel Mixer Cable Bundle Studio and Live Audio Cables XLR TRS 15, 50, and 100 foot $279.95 This specially priced cable bundle contains numerous types of cables. (20) 20 ft XLR male to XLR female for connecting microphones or speakers. (2) 100 ft XLR male to XLR female cables for connecting to loud speakers. (8) XLR male to TRS for monitors. (2) XLR female to TRS for outboard effect, and professional cd players. (4) 50 ft XLR male to XLR female for larger cross-stage lines…. |
|
|
IDX CW-5HD Wireless HD Video Transmission System with 5.18GHz – 5.86GHz Frequency $5,395.00 IDX CW5HD is a wireless Video Transmission System with high definition signal that can be viewed wirelessly as much as 150 feet away. Uncompressed wireless transmitter and receiver system for both HD-SDI and SD-SDI video signal processing. Multiple formats of video with two channels of SDI embedded audio.Transmission delay less than 1ms. Maximum range up to 100 feet (30m) through walls and up to 1… |
|
|
RiteAV – 3.5mm to RCA Stereo Female Cable – 6 inch $0.01 RiteAV – 3.5mm to RCA Stereo Female Cable – 6 inch… |
|
|
VideoSecu 100 Feet Video Power BNC RCA Cable for CCTV Security Cameras 1JE $2.29 Use with Closed Circuit Television (CCTV) applications and security camera components. This pre-terminated CCTV cable is perfect for transmitting video and power. Simplify the installation of surveillance systems by using one cable to carry video and power. Now, it’s easier than ever to mount your camera just about anywhere you would like…. |
|
|
Your Cable Store XLR 3 Pin Microphone Cable (6 feet) $2.80 6 Foot XLR 3 Pin Microphone Cable Free Shipping… |
|
|
AKG Acoustics K 240 MK II Professional Semi-Open Stereo Headphones $199 The Professional Semi-Open Stereo Headphones by AKG Acoustics features Varimotion technology and XXL transducers. The K 240 MK II?s semi-open ear cups have around the ear coupling to deliver solid bass, accurate mids and crystal-clear highs. Thanks to its lower impedance and improved sensitivity, it can be used with low-output Audio sources to deliver its incredible sound. The detachable OFC cable has Gold-plated plugs for optimum audio quality and exceptional ease of service. -Professional hi-fi stereo studio headphones-Semi-open, Circumaural design-Self-adjusting headband for optimum fit -Varimotion speakers (multiple-thickness diaphragm for dynamic transducer)-Leatherette ear pads and velvet ear pads-Semi-open, dynamic headphones-Sensitivity: 91 dB/mW, 104 dB/V -Frequency range: 15 to 25,000 Hz -Rated impedance: 55 Ohms -Max. Input power: 200 mW -Ear pads leatherette and velvet -Cable: 3m (9.84 feet) single-sided and 5m (16.40 feet) coiled cable (99.9% oxygen-free); plug-in cable on headphones (mini-XLR connector) -Connector: Gold plated stereo mini jack -Adapter: gold plated 1/8″ to 1/4″ screw-on adapter -Net Weight (without cable): 8.5 oz. |
|
|
AKG Acoustics K 271 MK II Closed-Back Stereo Headphones $269 The Hi-Fi Closed-Back Stereo Headphones combines the benefits of AKG?s Circumaural design for extreme comfort, while the closed-back design maximizes isolation from ambient noise. Thanks to its XXL transducers, the K 271 MK II sounds clean, smooth and very rich. The Closed-Back Stereo Headphones is the perfect choice for any Application where sonic bleed could cause problems such as Broadcast work. Another important feature of the K 271 MK II is the addition of a Switch in the headband that mutes the Audio just as soon as the headphones are taken off. -Professional circumaural hi-fi stereo studio headphones-Self-adjusting headband for optimum fit-Varimotion speakers (multiple-thickness diaphragm for dynamic transducer)-High noise attenuation-For onstage and studio use-Automute feature mutes headphones when they are taken off-Leatherette and additional velvet ear pads-Closed-back, dynamic headphones-Sensitivity: 91 dB/mW, 104 dB/V -Frequency range: 16 to 28,000 Hz -Rated impedance: 55 Ohms -Max. Input power: 200 mW -Cable 3m (9.84 feet) single-sided and 5m (16.40 feet) coiled cable (99.9% oxygen-free); plug-in cable on headphones (mini-XLR connector) -Connector: Gold plated stereo mini jack -Adapter: gold plated 1/8″ to 1/4″ screw-on adapter -Net Weight (without cable): 8.5 oz. |
|
|
Alesis Portable Four-Channel PA System for iPod TRANSACTMX $299 Remember when playing a simple show and setting up the PA meant moving racks and racks of gear, lugging hundreds of pounds of speakers, and running miles of cables? Those days are over, thanks to the Alesis TransActive MX. This all-in-one, four-channel PA speaker gives you everything you need to play the show, play transition Music from your iPod or iPhone, and load in and out in comfort. The TransActive MX is a complete, active PA system in a single, portable cabinet you can carry with its built-in handles or roll using the recessed wheels and pullout handle. The system has a four-channel mixer built in with XLR and 1/4-inch inputs for microphones, all kinds of instruments, guitars, and more. Plus, the TransActive MX has a dock for all docking models of iPod and iPhone, playing music, and charging. This self-powered speaker has a built-in amplifier and a two-way loudspeaker for full-range sound. And it runs for hours and hours on its internal, rechargeable battery. The TransActive MX’s input section enables you to connect four Channels of microphones, instruments, guitars, and other sound sources. It has XLR, 1/4-inch, and RCA inputs for a variety of gear. The TransActive MX uses a built-in amplifier for low Distortion and high efficiency. The large Driver gives you great low end and powerful, crisp highs. The TransActive MX has a built-in rechargeable battery for hours of cordless amplification. You can also plug in for unlimited performance time. Rock the club with the TransActive MX. You’ll spend less time and energy carrying and setting up, and more time enjoying the gig. -Features: -Powerful, portable, self-contained PA system for up to 150 feet of sound projection-Four-channel mixer with Inputs for microphones, instruments, and more-Dock enables music playback from all docking models of iPod and iPhone-Rugged construction, built-in wheels, and a retractable handle for easy transport-Up to 12-hour rechargeable battery or plug-in power-Mounts on a standard 35 |
|
|
Audio Technica AT8314-20R Balanced Microphone Cable – 20 Feet $54.75 The Audio-Technica AT8314-20R Premium 20′ Balanced Microphone Cable is engineered for maximum signal transfer and minimum loss. Designed for low-impedance operation, this balanced cable features heavy-duty construction and professional Neutrik connectors. To protect signal quality, each conductor has an individual spiral shield inside the molded insulating sheath. A conductive PVC layer inside each shield dissipates static buildup during flexing.–Cable Length: 20′ (6.1 m)-Gauge: 24 AWG Connector 13-Pin XLR Male-Connector: 23-Pin XLR 90? Angled Female-Jacket: Heavy-duty PVC Connector type Neutrik-Shielding: Outer shield: Dual copper Inner shield: Twin conductive PVC-Warranty: Audio-Technica lifetime limited warranty |
|
|
Fender® 230-1060-000 Multi-Effects Pedal for Mustang® Series Amplifiers $299.99 The Fender? Multi-Effects Pedal for Mustang? Series Amplifiers is a versatile high-performance floor unit that delivers pro-level amp modeling, effects and artist preset sounds in a richly varied wealth of musical styles. And you don?t have to be a tech expert as it?s easy to use right out of the box. It is designed for a variety of applications, only one of which is a great multi-effects unit for any basic Guitar amp that puts more than three dozen Digital effects at your feet. It?s also a modeling preamp with low-impedance speaker-emulated outputs for running direct to a PA system, a modeling preamp with line-level outputs for use with a power amp and speakers, a silent practice system with Stereo Headphone output and auxiliary Input perfect for playing along with an iPod or other media player, and a fantastic tone. Its features include nine footswitches and a solid aluminum treadle-style control pedal, intuitive Mustang? III control panel and LCD window, 12 amp models, 37 effects, 100 onboard factory and User presets, ?individual stompbox” mode in which amp models can be bypassed, headphone output and auxiliary input, dual XLR and dual 1/4″ line outputs with level control (outputs can be programmed for optimal response with PA system, power amp or guitar amp), chromatic tuner, and easy USB Connectivity for high-quality low-latency Audio output and Interface with free Fender? FUSE? application. Fender? FUSE? software, included as a free download, offers on-screen parameter control, deep editing, ?hidden” parameters, unlimited preset storage, easy firmware Upgrades and additional free content from Fender, Fender? artists and other users worldwide. —–Amplifier Type: Digital -Inputs: One Input -Controls: 9 Foot Switches, Preset Access Knob, Amp button, Stomp button, Mod button, Delay button, Reverb button, Utility -button, Save button, Exit button -Effects Loop: Effects Loop -Auxillary Input: 1/8″ Aux Input -Headphone Jack: One -Line Out: Two XLR And Two 1/4-inch |
|
|
Flight Simulator X: X-1 Second Generation Add On – Windows $14.97 The Xtreme Prototypes X-1 Second Generation add-on package for Microsoft Flight Simulator X contains six variations of the four Bell X-1 Second Generation research rocket planes and one light variation of a modified B-29 “Superfortress” carrier aircraft to simulate high-altitude launch. The Bell X-1 “Second Generation” was an advanced version of the original X-1, the first aircraft in history to have broken the Sound barrier with Army Air Corps captain Charles E. “Chuck” Yeager. The second generation of X-1s, built in the late 1940s and early 1950s, were designed to double the speed of sound and set new altitude records in excess of 90,000 feet. The new X-1s were similar to the original (orange) aircraft, with the same XLR-11 rocket engine (equipped with a turbo pump), but were about five feet longer, 2500 pounds heavier and had a conventional glass canopy. For the serious flight simulation enthusiast and X-1 fan, the Xtreme Prototypes X-1 Second Generation is a chance to relive important moments of the history of flight and experience the performance of a series of aircraft whose new rocket systems, cockpit Ergonomics and flight controls were quite a challenge for the test pilots who flew them more than fifty years ago. The Xtreme Prototypes X-1 SG add-on package will allow you to fly at very high altitudes at more than twice the speed of sound in four different versions of the aircraft, simulate virtually all the procedures required during an actual research mission (including emergency procedures such as extinguishing an engine fire or jettisoning the canopy to bail out), and even test the never-built X-1C that was to be equipped with the Sperry A-12 Propilot system and a .50 caliber Browning machine gun.-Custom X-1 flight model to simulate rocket-powered high-speed and high-altitude flight in FSX-Highly detailed 3D exterior models with more than 500 parts, 40 animations, high-resolution textures and unique markings-Three fully functional and highly detailed 3D v |
|
|
Gemini Complete Professional Powered Speaker System (NO Stands) $411 * 2 XTR-SAT 10″ Trapezoidal loudspeakers & 15″ powered subwoofer-* Efficient MDF Bandpass subwoofer enclosure w/ 35mm Standmount cap & wheels-* 3-channel power amplifier & active crossover built-in to subwoofer-* 230 watts RMS on subwoofer channel (Subwoofer Freq. Response: 100Hz to 20kHz)-* 85 watts RMS per satellite channel (Satellite Freq. Response: 35Hz to100Hz)-* 400 watts total RMS & 800 watts peak power-* 120dB total continuous SPL-* Individual channel Sensitivity/Volume controls-* Balanced XLR & 1/4″ inputs-* SpeakonT outputs for satellite channels (Cables Included)-* Variable speed fan-* Full protective metal grill-* Hard wearing black painted finish w/rubber feet-* Speaker stands OPTIONAL, not included-* Weight: 112 lbs. (51 kg)-* Shipping: 119 lbs. (54 kg) |
|
|
HOSA 100 Foot Shielded Mic Cable w/ Male XLR to Fenale XLR $39.99 * Professional coax cable for transmission of AES/EBU digital audio-* Also for 3-pin DMX lighting applications-* Cable w/Male XLR to Female XLR-* 100 Feet-* Shielded |
|
|
HOSA CXP010 Microphone Cable – 10 Feet $24.99 Features a Neutrik brand female XLR connector on the microphone, and a 1/4-inch connector on the other end-10 feet in length -Made in the U.S.A. |
|
|
HOSA CXP025 Microphone Cable – 25 Feet $31.99 Features a Neutrik brand female XLR connector on the microphone, and a 1/4-inch connector on the other end-25 feet in length-Made in the U.S.A. |
|
|
HOSA MXP010 XLR to 1/4-Inch Phone Plug ? 10 Feet $29.99 Scores of applications in live performance and Recording settings |
|
|
HOSA MXP025 XLR to 1/4-Inch Phone Plug ? 25 Feet $39.99 Scores of applications in live performance and Recording settings |
|
|
HOSA Microphone Cable – [10 Feet] $6.39 This is a 10 foot long XLR female to unbalanced 1/4″ male Microphone cable The 1/4″ plug features an injection-molded connector |
|
|
HOSA Microphone Cable – [15 Feet] $10.99 This is a 15 foot long XLR female to unbalanced 1/4″ male Microphone cable The 1/4″ plug features an injection-molded connector |
|
|
HOSA STX-803F 8-Channel Audio Snake $35.99 XLR Male to Female / Balanced 1/4″ / Feature Hosa’s molded terminations that are color-coded for easy identification / 3m (9.9-Feet) |
|
|
HOSA STX-803M 8-Channel Audio Snake $34.99 XLR Male to Balanced 1/4″ / Features Hosa’s molded terminations for outstanding performance and durability / 3m (9.9-Feet) |
|
|
HOSA STX110F Balanced XLR Female to 1/4 Male Phone Plug – 10 Feet $7.99 10 foot Balanced XLR Female to 1/4″ Male Phone Plug |
|
|
HOSA STX110M Balanced XLR Male to 1/4 TRS Phone Plug – 10 Feet $7.99 10 Foot Balanced XLR Male to 1/4″ TRS Phone Plug |
|
|
HOSA XLR-805 8-Channel Audio Snake $49.99 Balanced XLR Male to Female / 5m (16.5-Feet) |
|
|
HOSA XRF-105 XLR FEMALE-to-RCA Cable $9.99 You’re sure to find at least one of these in just about every Recording studio in the known universe This great quality XLR-to-RCA cable is wired Pin-2 hot to match nearly every Application on stage and studio Probably most typically used to Interface high end microphones with various gear Five feet in length |
|
|
M-Audio 9900-52991-00 SBX10 240-Watt Professional Active Subwoofer $379 The M-Audio SBX10 active Subwoofer is designed to give your monitoring system some serious low end. The SBX10 delivers tight, clean Bass response down to 20Hz, revealing the extreme low frequencies in your Music so you can make accurate mixing decisions. Comprising a 10″ fiberglass/paper composite driver, a 240-watt all-discrete internal amplifier, and a variable 50-200Hz crossover, the SBX10 subwoofer delivers unbeatable performance in a compact chassis, great for studios where space is tight. An oversized magnet, high-temperature voice coil, high-density cabinet and a full complement of inputs are just some of the additional components that round out this high-quality design. The unit even includes a bypass footswitch so you can easily judge how mixes will Sound with and without a Dedicated subwoofer. The SBX10 represents the perfect addition to any studio monitor setup. -10″ fiberglass/paper composite cone driver with oversized magnet and high-temperature 2″ long-throw voice coil -240-watt Class A/B amplifier with all-discrete transistor design -Flared rear Bass-reflex port -Variable 50-200Hz crossover -20-200Hz low Frequency response -Adjustable gain (-30dB to +6dB) -Balanced/unbalanced XLR, balanced/unbalanced 1/4″ TRS and RCA inputs -Balanced/unbalanced XLR and balanced/unbalanced 1/4″ TRS outputs allow easy setup of 2.1 monitoring systems -Includes subwoofer bypass footswitch -Phase switch (0?/180?) -Over-temperature protection -Vinyl-covered high-density internally braced 3/4″ MDF cabinet with 1″ front and back baffles -Removable grill -Removable feet |
|
|
Monster Cable 607227 Standard 100 10-Feet Microphone Cable $21 With Monster Standard 100, you?ll use a cable that sounds as good as it looks. So whether you?re gigging, tracking in the studio, or jamming in the garage, Standard 100 is a great entry-level cable to get you started. Standard 100 delivers the quality, durability, and reliability every Monster musician needs.-Twisted pair construction reduces Audio bandwidth distortions for better clarity-Extra-flexible Duraflex outer jacket for superior reliability and cut resistance-92% coverage copper-braided shield rejects RFI and EMI for a lower noise floor and increased resolution-Interchangeable Color O-rings attach to each XLR connector for easy identification-Heavy-Duty Injection Molded Connector: specially designed strain relief increases cable durability and resists damage-Easy-to-ID Color-Coded Rings for easy identification when you?re plugging in multiple cables-Ultra-Flexible Duraflex Protective Jacket coils & uncoils effortlessly to withstand heavy use-Special Copper Windings provides improved clarity and tighter bass, even over long lengths-Heavy-Duty dense copper braided shielding for excellent noise rejection |
|
|
Nerf Vortex Lumitron Blaster $0 Nerf Vortex Lumitron Blaster: Launches glowing discs up to 60 feet 10-disc Firefly Tech magazine, pump handle and tactical rail Includes 10 glow discs and instructions Requires 4 AA batteries (sold separately) |
|
|
PreSonus StudioLive 16.0.2 16×2 Performance & Recording Digital Mixer $1299 PreSonus StudioLive 24.4.2 and 16.4.2 changed the game, offering amazing performance and ease of use for a great price. Now PreSonus packed the same Audio quality, performance, seamlessly Integrated Software (including remote control) into a smaller, even more affordable package. In a ?footprint” of less than 2 square feet (0.19 m2), the compact, 16-channel StudioLive 16.0.2 offers 8 Mono Input Channels and 4 Stereo channels and provides 12 XMAX Class A solid-state MIC preamps. (Well, okay, it actually has 13 XMAX preamps; the Talkback input has one, too.) But don’t let its size fool you; the 16.0.2 is jam-packed with features and Processing power, employs the same workflow and easy-to-use mixing-surface design as the bigger StudioLive boards, and sounds every Bit as good, with the same high-definition, wide-dynamic-range, Digital converters.-Features: -4 Auxiliary buses (pre/post-fader send)-2 Internal FX buses-2 stereo 32-Bit digital effects processors with customizable reverb and delay presets -One 31-band stereographic EQ (on main outputs only)-Scene store and recall-Settings can be copied among channels and buses and saved as User presets-Lockout mode protects your settings from meddlers and accidents-8 mono mic/line channel inputs, each with: -High-headroom Class A XMAX mic preamplifier-XLR mic and balanced ?” line inputs-60 mm precision fader -4 Stereo Line Channel Inputs, with: -High-headroom Class A XMAX mic preamplifier (Ch. 9, 11, 13, and 15)-XLR mic inputs (Ch. 9, 11, 13, and 15)-Balanced ?” line inputs (Ch. 9-16)-Unbalanced RCA line inputs (Ch. 13-16)-60 mm precision fader (4 stereo) -Fat Channel signal processing on all channels and buses, with: -3-band semi-parametric EQ (individual band on/off)-Full-featured compressor-Standard downward expander-Limiter-Phase reverse (12 mic preamplifiers only)-Pan with Dedicated 15-LED display-Stereo link for input channels and aux buses-High-pass filter-16-in/16-out FireWire Recor |
|
|
Pyle 100 Watt Wireless Battery Powered PA System $126.99 * Unit Powered by Internal Rechargeable Battery Pack -* XLR 1/4” Combo Mic Input -* Stereo RCA Aux Input and Output -* Built In Recharger for 9V Mic Battery-* Independent Volume Gain for Each Input -* Bass and Treble Controls -* On Air, Charge & Power LED Indicators -* Wired and Wireless Handheld Mics Included -* 6.5” Full-Range Speaker -* 50W RMS, 100W Peak Power -* Unit Battery Life: >4 Hours -* Mic Battery Life: >5 Hours -* Operation Range: 100 Feet -* Ported Enclosure for Increased Bass Response -* Carry Handle For Easy Transport -* Operating Frequency: 228.10 MHz -* 110/220 Voltage Switchable -* Dimensions: 10.6” x 7.9” x 6.2”-* Weight: 17.6 lbs-* Carrying Case for Accessories Included |
|
|
Pyle 20 Feet 12 Gauge Professional 1/4” Photo To XLR Male $5.99 * 20 Feet 12 Gauge Professional 1/4” Photo To XLR Male-* Speaker/Microphone Cable |
|
|
Pyle 200 Watt Wireless Battery Powered PA System $138.99 * Unit Powered by Internal Rechargeable Battery Pack -* 3 Channel Mixer -* Two XLR 1/4” Combo Mic Inputs -* Stereo RCA Aux Input and Output -* Binding Post Output for External Speaker -* Independent Volume Gain for Each Input -* Master Volume, Bass and Treble Controls -* On Air, Charge & Power LED Indicators -* Wireles Handheld Mic Included -* 8” Woofer with 2.5” Compression Tweeter -* 100W RMS, 200W Peak Power -* Unit Battery Life: >4 Hours -* Mic Battery Life: >5 Hours -* Operation Range: 90 Feet -* Ported Enclosure for Increased Bass Response -* Carry Handle -* 35mm Speaker Stand Mount -* Frequency Response: 100Hz-15KHz -* 110/220 Voltage Switchable -* Dimensions: 23.8” x 10.24” x 13.39” -* Weight: 30.54 |
|
|
Samson Audio SDIRPLUS Series Stereo S-Direct Box Plus $39 The S-direct plus gives you all the same features of the original S-direct, but in stereo. It’s like having two direct boxes in one, perfect for Keyboard players or any instrument with multiple outputs.-1/4-inch linked inputs/outputs-48 volt phantom power or 9 volt operation with auto Battery shut off-Switchable ground lift-Gold plated XLR balanced outputs-Solid extruded aluminum chassis with large rubber feet |
|
|
Shure PG Series Handheld Mic System $374.99 SHJ1007<br/>Features:<ul><li>Mic system<li>Handheld system<li>XLR connector<li>0.25” Connector<li>Cardioid polar pattern<li>250 feet Range<li>Consumer Alert! Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. |
|
|
Shure Wireless Condenser Lavalier Microphone System – PG14/PG185-H7 $299 PG Series wireless Microphone systems features UHF wireless technology with up to 8 User selectable frequencies. This system is configured with the PG4 receiver, PG1 body-pack transmitter and PG185 lavalier microphone. The PG4 Receiver is a tabletop or rack-mounted unit with 1/4″ phone and XLR outputs for complete compatibility with any amplifier or Recording device. The PG4 features diversity reception where twin antennas minimize radio frequency (RF) dropout and interference. The PG4 is easily rack-mounted with the Optional Shure URT (Universal Rack Tray). The PG1 Bodypack is a comfortable, lightweight body-pack transmitter with a TA4-Female Input connector to accommodate lavalier microphones and instrument cables. This system includes the PG185 lavalier microphone, suitable for general speech and vocal capturing. The PG1 is powered for up to 8 hours on a single alkaline or rechargeable 9-Volt battery.-Features: -Compatible with most Audio systems: Including XLR balance and 1/4″ unbalanced audio outputs for the receiver; the body pack transmitter is compatible with systems using a TA4F 4-pin mini connector-Condenser lavalier microphone: Discreetly amplifies your voice during presentations and lectures-Predictive diversity: Allows for continuous reception and prevents interruptions-Internal antenna diversity: Eliminates breakage and antenna placement issues-Transmitter lockout: Prevents accidental shutdown-Durable design: For extended use-Specifications: -System: -System: Rack-mount UHF Bodypack -RF Carrier Frequency Range: H7 / 536 – 548 MHz -Working Range: up to 250-feet -Frequency Response: 45Hz to 15kHz -Signal-to-Noise Ratio: THD: 0.5%, typical Ref. +/- 33 kHz deviation, 1kHz tone -Simultaneous Systems: 8 -Receiver: -Receiver: PG4 UHF Diversity -Outputs: 1/4″ Phone and XLR -Power Requirements: AC Adapter (120 VAC, 60Hz) -Display: LED -Antenna: Diversity -Transmitter: -Transmitter: PG1 Bodypack -Input Connector: TA4-Female -Microphone: PG185 Lavali |
|
|
Signal Flex Electronics LoZ Microphone Cable with Strain Relief Springs $26.24 FS1011Signal Flex is a nationwide leader in instrument cable with their high-quality, low-priced import cables that are the finest low-noise polymer cables available.<p>Features:<ul><li>LoZ straight black cable<li>Female XLR (Cannon-type) and male XLR connectors<li>Unbalanced<li>Available in lengths of 20 and 30 feet</ul><p><b>About Signal Flex Electronics</b><p>Signal Flex Electronics has become an industry leader in electronics over the past decade. A manufacturer of both sound and microphone gear, their specialty has recently become the production of cables, jacks and adapters. Be it instrument cable, microphone cable, speaker cable or all types of sound adapters, Signal Flex appeals to both the professional and casual consumer alike. Their ability to consistently produce a quality product has elevated Signal Flex Electronics into the upper echelon of electronic manufacturing. |
|
|
Signal Flex Electronics LoZ Microphone Cable with Strain Relief Springs $22.99 FS1011Signal Flex is a nationwide leader in instrument cable with their high-quality, low-priced import cables that are the finest low-noise polymer cables available.<p>Features:<ul><li>LoZ straight black cable<li>Female XLR (Cannon-type) and male XLR connectors<li>Unbalanced<li>Available in lengths of 20 and 30 feet</ul><p><b>About Signal Flex Electronics</b><p>Signal Flex Electronics has become an industry leader in electronics over the past decade. A manufacturer of both sound and microphone gear, their specialty has recently become the production of cables, jacks and adapters. Be it instrument cable, microphone cable, speaker cable or all types of sound adapters, Signal Flex appeals to both the professional and casual consumer alike. Their ability to consistently produce a quality product has elevated Signal Flex Electronics into the upper echelon of electronic manufacturing. |
|
|
Sony ECM-44B Omni-Directional Lavalier Condenser Microphone $164.94 The ECM-44B makes the exceptional quality of Sony’s electret condenser microphones available for a variety of Sound reinforcement requirements, such as lectures and demonstrations. Measuring only 8.5 x 14.5mm, the ECM-44B reduces the visual distraction to the audience. The ECM-44B can be depended upon for clean, bright, yet natural reproduction. To maintain its low cost, this microphone operates on a single AA Battery for over 5000 hours of service.-Frequency Response: 40 Hz – 15 kHz-Dynamic Range: (Typical) 90 dB-Signal-to-Noise Ratio: 62 dB at 1 kHz-Maximum Input Sound Level: 122 dB at 1 kHz, 1% THD-Power Requirements: AA Battery (1.5v DC) battery power only-Output Impedance: 250 Ohms 1 kHz Balanced-Output Connectors: XLR-3M Type-Power Supply: Length 5 x Width 0.82 inch (126.5 x 20mm)-Cable: Length 10 feet x 0.09 inch (3m x 2.3mm)-Power supply: 4.2 ounces (119 grams)-Dimensions Microphone: Length 0.6 x Diameter 0.34 inch (14.5 x 8.5mm)-Weight Microphone: 0.07 ounces (2.0 grams) |
|
|
Technical Pro PM-21 Podcast Mixer Kit $62.94 The PM Series includes everything needed to make Professional sounding Audio podcasts on a standard PC or Mac Computer or Recording device. The PM-21 includes a mixer, mic, mic stand and headphones. The mixer is housed in a compact rugged metal cabinet and features four source inputs with six Discrete channels; two Gold plated ?”microphone inputs; iPod/MP3 (RCA and 3.5mm) inputs; and Stereo Line level for additional audio such as CD (RCA). Each channel features level adjust and Bass/Treble equalization. A master Output control is paired with a level adjust for the dual headphone outputs. The mixer can be powered either by using the included AC/DC adapter, or with a 9V Battery for field recordings with a laptop. For maximum flexibility, the unit features Analog stereo line out as well as USB audio output. In keeping with Technical Pro?s audio expertise, the mixer features excellent noise characteristics S/N -86dB and low distortion, a total of less than 0.09% THD. The included pro-grade microphone is a rugged and good-looking dynamic type. It features a die-cast body, on/off Switch and XLR type connection with 10 foot cable with a ?” plug. Sensitivity is -56.5dB, Frequency response 80-15kH, 600 Ohms impedance. A heavy weighted base Desktop mic stand is included. The model HP-20 headphones are based on Technical Pro DJ headphones since the requirements are similar: they deliver excellent isolation, comfort and the great sound expected from all Technical Pro headphones. These circumnaural headphones feature ?Super Bass Drivers”. Cord length is 10 feet terminated with 3.5mm stereo plug. Sensitivity is 107dB +/- 3 db, Frequency Response, 20-20kHz. For experienced professionals making podcasts is a fairly simple process. However for the first timer, the process can be daunting. The PODCASTER package includes all the required Software and a step-by-step tutorial developed by Podbean. This tutorial covers everything from scripting, podcast content community websites and tip |
|
|
Technical Pro PM-22 Podcast Mixer Kit $95 The PM Series includes everything needed to make Professional sounding Audio podcasts on a standard PC or Mac Computer or Recording device. The mixer is housed in a compact rugged metal cabinet and features four source inputs with six Discrete channels; two Gold plated ?”microphone inputs; iPod/MP3 (RCA and 3.5mm) inputs; and Stereo Line level for additional audio such as CD (RCA). Each channel features level adjust and Bass/Treble equalization. A master Output control is paired with a level adjust for the dual Headphone outputs. The mixer can be powered either by using the included AC/DC adapter, or with a 9V Battery for field recordings with a laptop. For maximum flexibility, the unit features Analog stereo line out as well as USB audio output. In keeping with Technical Pro?s audio expertise, the mixer features excellent noise characteristics S/N -86dB and low distortion, a total of less than 0.09% THD. The included pro-grade microphones are rugged and the good-looking dynamic type. Each microphone features a die-cast body, on/off Switch and XLR type connection with 10 foot cable with a ?” plug. Sensitivity is -56.5dB, Frequency response 80-15kHz. Two heavy weighted base Desktop mic stands are included. The model HP-20 Headphones are based on Technical Pro DJ headphones since the requirements are similar: they deliver excellent isolation, comfort and the great sound expected from all Technical Pro headphones. These circumnaural headphones feature ?Super Bass Drivers”. Cord length is 10 feet terminated with 3.5mm stereo plug. Sensitivity is 107dB +/- 3 db, frequency Response, 20-20kHz. For experienced professionals making podcasts is a fairly simple process. However for the first timer, the process can be daunting. The PODCASTER package includes all the required Software and a step-by-step tutorial developed by Podbean. This tutorial covers everything from scripting, podcast content community websites and tips on how to promote your podcasts. Also included is a CD |
|
|
Whirlwind MIC-10 10-Feet Connect Microphone Cable $6.99 XLR Female to Male / MK Type Strain Relief with Velcro Cable Tie |
|
|
Whirlwind MIC-25 25-Feet Connect Microphone Cable $9 XLR Female to Male / MK Type Strain Relief with Velcro Cable Tie |
|
|
Whirlwind MIC03 XLR Female to XLR Male Microphone Cable $4.95 3 feet (length) / MK strain relief with Velcro cable tie / Connect |
|
|
Whirlwind MK4-10 XLR Male-XLR 10-Feet Female Audio Cable $14 Extremely flexible, resistant to microphonics caused by handling, and reliable under the roughest conditions |
|
|
Whirlwind MK4-25 XLR Male-XLR 25-Feet Female Audio Cable $21 Extremely flexible, resistant to microphonics caused by handling, and reliable under the roughest conditions |
|
|
Whirlwind MK4-50 XLR Male-XLR 50-Feet Female Audio Cable $34 Extremely flexible, resistant microphonics caused by handling, and reliable under the roughest conditions |
|
|
Whirlwind MS-12-M-NR-025 Mini Series 12-Channel Snake Cable $199.99 The Whirlwind Medusa Mini Series 12 Channel Snake is a cable with a heavy-duty low-profile mini steel stagebox at one end and a fanout at the other end. The box features clearly labeled side-exit connectors and fits into many places where a traditional box would be too bulky. The cabling consists of heavy-duty, flexible Belden CM rated multipair cable. Each pair contains two twisted 24GA 7×32 polyethylene insulated conductors with 100% foil shield and 24GA drain wire. The fanouts feature genuine Whirlwind connectors. MIC Channels are numbered and return connectors are lettered by engraving the metal barrel with large, easy to read graphics. Snake cables make it possible to combine several balanced (microphone) cables into one smaller diameter multipair cable, making setup and teardown much faster and easier, with less tangling and clutter than would otherwise be the case.-Fanouts with multiple layers of rugged heat shrink at the most critical points-Fanouts feature connectors with engraved numbers and letters-Genuine Kellems wire mesh hanger to support the fanout at the board-Genuine Kellems strain relief and grip with internal cable clamp-12 Channel stagebox to fanout snake cable type-Stagebox with 12x XLR female and 0x return sockets Connector 1-12x XLR male Connector 2 |
|
|
Whirlwind MS-6-M-NR-025 Mini Series 6-Channel Snake Cable $171.99 The Whirlwind Medusa Mini Series 6 Channel Snake is a cable with a heavy-duty low-profile mini steel stagebox at one end and a fanout at the other end. The box features clearly labeled side-exit connectors and fits into many places where a traditional box would be too bulky. The cabling consists of heavy-duty, flexible Belden CM rated multipair cable. Each pair contains two twisted 24GA 7×32 polyethylene insulated conductors with 100% foil shield and 24GA drain wire. The fanouts feature genuine Whirlwind connectors. MIC Channels are numbered and return connectors are lettered by engraving the metal barrel with large, easy to read graphics. Snake cables make it possible to combine several balanced (microphone) cables into one smaller diameter multipair cable, making setup and teardown much faster and easier, with less tangling and clutter than would otherwise be the case.-Fanouts with multiple layers of rugged heat shrink at the most critical points-Fanouts feature connectors with engraved numbers and letters-Genuine Kellems wire mesh hanger to support the fanout at the board-Genuine Kellems strain relief and grip with internal cable clamp-6 Channel stagebox to fanout snake cable type-Stagebox with 6x XLR female and 0x return sockets Connector 1-6x XLR male Connector 2 |
|
|
Whirlwind MS-80-M-NR-050 Medusa Series 12-Channel Snake Cable $236.82 The Whirlwind Medusa Mini Series 12 Channel Snake is a cable with a heavy-duty low-profile mini-steel stagebox at one end and a fanout at the other end. The box features clearly labeled side-exit connectors and fits into many places where a traditional box would be too bulky. The cabling consists of heavy-duty, flexible Belden CM rated multipair cable. Each pair contains two twisted 24GA 7×32 polyethylene insulated conductors with 100% foil shield and 24GA drain wire. The fanouts feature genuine Whirlwind connectors. MIC Channels are numbered and return connectors are lettered by engraving the metal barrel with large, easy to read graphics. Snake cables make it possible to combine several balanced (microphone) cables into one smaller diameter multipair cable, making setup and teardown much faster and easier, with less tangling and clutter than would otherwise be the case.-Fanouts with multiple layers of rugged heat shrink at the most critical points-Fanouts feature connectors with engraved numbers and letters-Genuine Kellems wire mesh hanger to support the fanout at the board-Genuine Kellems strain relief and grip with internal cable clamp-12 Channel stagebox to fanout snake cable type-Stagebox with 8x XLR female and 0x return sockets Connector 1-8x XLR male Connector 2 |
|
|
Whirlwind Open Box MK4-10 XLR Male-XLR 10-Feet Female Audio Cable $11.5 ** Open Box Item: Limited Availability-100% Guaranteed ** Accusonic+2 fitted with XLR connectors to ensure superior cable performance / Features finely stranded center conductors and braided shield |
|
|
Whirlwind YX2M Y-Adapter Cable – 1.5-Feet $21.99 Single conductor cables with 1/4″ unbalanced connectors / One XLR female 1/4″ jack wired to two male plugs |
|
|
Yamaha A-S2000 Integrated Stereo Amplifier $1999.95 Yamaha Introduces a New, Superior Approach to Analog Amplifier Design. This high performance amplifier with balanced inputs brings out the best of other components in the system.-Full Floating and Balanced Circuit Design Achieves for the First Time the Full Potential of Analogue Amplification-Full-Stage Balanced Signal Transmission-Floating Balanced Power Amp-Fully Balanced Control Amp-Parallel Volume and Tone Controls-Symmetrical Construction-Specially Designed Feet-Headphone Amp for Low Impedance Drive-Discrete Phono Amp-Maximum Power (4 ohms, 1 kHz, 0.7 % THD, for Europe) 160 W + 160 W / (8 ohms, 1 kHz, 10% THD) 120 W + 120 W / (4 ohms, 1 kHz, 10% THD) 190 W + 190 W -Minimum RMS Output Power (8 ohms, 20 Hz?20 kHz, 0.02% THD) 90 W + 90 W / (4 ohms, 20 Hz?20 kHz, 0.02% THD) 150 W + 150 W -Dynamic Power/Channel (8/6/4/2 ohms) 105 W/135 W/190 W/220 W -Damping Factor (8 ohms, 1 kHz) 160 -Input Sensitivity/ Impedance CD, etc. 150 mV/47 k-ohms / Phono MM 2.5 mV/47 k-ohms / Phono MC 100 ?V/50 ohms / Main In 1 V/47 k-ohms -Frequency response CD, etc. to Speaker Out, Flat Position 5 Hz?100 kHz +0 dB/-3 dB / CD, etc. to Speaker Out, Flat Position 20 Hz?20 kHz, +0 dB/-0.3 dB -RIAA Equalization Deviation Phono MM 20 Hz?20 kHz, ?0.5 dB / Phono MC 20 Hz?20 kHz, ?0.5 dB -Total Harmonic Distortion (20 Hz-20 kHz) CD Balanced to Speaker Out 0.01% (90 W/8 ohms) / CD, etc. to Speaker Out 0.015% (90 W/8 ohms) / Phono MM to Rec Out 0.005% (2 V) / Phono MC to Rec Out 0.05% (2 V) -Signal-to-Noise Ratio [IHF-A Network] CD, etc. (S: 150 mV, Input Shorted) 98 dB / Phono MM (S: 5 mV, Input Shorted) 93 dB / Phono MC (S: 500 ?V, Input Shorted) 85 dB -Residual Noise (CD, etc., IHF-A-Network) -Channel Separation (1 kHz/10 kHz) CD, etc., Input 5.1 k-ohms Terminaled 74 dB/54 dB / Phono MM, Input Shorted, Vol: -30dB 90 dB/77 dB / Phono MC, Input Shorted, Vol: -30dB 66 dB/77 dB -Tone Control Characteristics Bass Boost/Cut (at 50 Hz) ?9 dB / Bass Turnover Frequency 350 Hz / Treble Boost/Cut (at 20 Hz |
